SIMATRIX 648 II Videomatrix-System

Description

The SIMATRIX 648 II is a economically priced video matrix system with up to 64 video inputs and 8 outputs.The SIMATRIX 648 II is the successor of the well-tried SIMATRIX 648, additionally providing the following:

• LAN connection: control, programming, and diagnosis via LAN, connection of LAN-based operating devices
• RS485/RS422 outputs for direct PTZ control of dome cameras (2 of 7 available PTZ protocols can be used at the same time)
• All 8 video outputs can be used for switching video signals to monitors, due to a dedicated signal loss axis.

With regard to functions and pin assignment, the SIMATRIX 648 II is hundred per cent downward compatible with the SIMATRIX 648 — to the point, that even the parameter file is fully compatible — and thus can serve as 1:1 substitute in existing systems.

Video Matrix

• Modular system in a 3U rack according to IEC 60297
• 75 O BNC connectors
• Minimum configuration: 16 inputs, 4 outputs
• Maximum configuration: 64 inputs, 8 outputs
• Video inputs expandable in increments of 16
• Video outputs expandable in increments of 1

Control

• LAN connector for 100 Base-T network for

• Connecting LAN-based operating devices
• Status display via integrated web server
• Programming
• Control by a management system

• Three serial interfaces (RS232) for connecting external systems, for programming via a PC, and for dialling substations
• Connection of 2 operating devices (with extension module 4) with freely programmable keys, e.g. SUT50, SUT32, SUT2, CKAXX. Via LAN, up to 16 LAN operating devices can be connected.
• Connection option for PTZ cameras (RS485/RS422) and domes with diverse protocols (expandable to 4 interfaces with 2 protocols)
• Up to 8 serial CL/TTY interfaces for connecting PTZ cameras and domes with suitable interface
• 16 protected alarm inputs (expandable up to 64 alarm inputs)
• Operating devices with freely programmable keys
• Basic program and 6 alarm programs pre-programmed on CD-ROM, for Windows 2000/XP/Vista, and Windows 7
• 8 control outputs for control of VCRs and image storage
• Master relay with 2 potential-free changeover contacts

Operation

• Via simple graphic user interface and visualisation by SDC Videoserver
• Via operating devices SUT50, SUT32, SUT2, CKAXX

Modules

• (A) 648 Term 2 TTY (648 TERM2): interface card for connecting 2 additional operating devices (max. 4)
• (B) 648 interface card Alarm16/SCU8 (648 A16/SCU): Alarm/SCU interface card with 8 serial TTY/CL (20mA) interfaces for connecting PTZ drive control units for pan/tilt/zoom cameras (max. 32 when fully equipped) and 16 alarm inputs (max. 64 when fully equipped)
• (C) 648 interface card Alarm16/Dome (648II A16/DOME): interface card with 1 serial RS485 bus interface (RS422-Simplex) for connecting up to 16 dome cameras (32 at most) and 16 alarm inputs per card (max. 64 when fully equipped)
• (D) 648II Video input card (648II VME16): expansion card for additional 16 video inputs with 75 O resistors (max. 64 when fully equipped)
• (E) VKS OSD text module (VKS OSD-TEXT): Expansion module with text generator for one additional video output (max. 8 when fully equipped)

Programming

• Time and weekday controlled alarm programs
• VTR switching contacts for alarm recording
• Freely programmable camera image sequence (can be programmed to start up when the system is switched on)
• On-screen text and time insertion for each operation place freely editable
• Camera text per camera (IBM character set, 12 lines at 24 characters each)
• Group and alarm switching (max. 8 cameras)
• Alarm positioning of PTZ cameras
• Each operation place can be limited regarding switching inputs to outputs
• Operating devices with freely programmable keys
• Special functions can be realized by macros.
• Parameter set can be stored as data file (library function)

Downloads

» Documentation, product software, etc.